Have you always wanted to make your own surfcraft? or do you know just want to see the process of your new board being made.
I offer several different types of workshops ranging from Bellyboards through to 12ft gliders.
bellyboard are a full day workshop.
you'll cut your paulownia sheets, glue them together on. mould, shape the rails, sand and seal it.
bodyboards are a full day workshop
we will get the machined blank ready for sheets.You'll cut your paulownia sheet and glue them on, cut cork rails and glue them on. shape and final sand.then several coats of a marine grade water based varnish.
unglassed boards from 5ft to 12ft are two full days.
first day we will cut paulownia sheets, glue them to our blank, glue the cork rails on and shape.Then route fin boxes and set them to allow the bio epoxy resin to sure over night.
second day we will sand the boxes and finish sand the whole board. Then give the board several coats of a marine grade water based varnish. depending on weather conditions you'll be able to take the board home that afternoon.
Glassed boards from 5ft - 12ft are a full day .
we will cut paulownia sheets, glue them to our blank, glue the cork rails on and shape. Then route fin boxes and finish sand ready for glassing. we will glass the bottom at the end of the first day.
its up to you whether you want to come back for each glassing stage (deck lamination, top and bottom filler coats and finish sand)
body board $80
these prices are on top of the your chosen boards priced. it includes lunch and all PPE required (mask and gloves)